| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
File Download Way and DIY 150W~600W(200V & 3mA~25A/30A/35A/0A)
1, User manual, PC software installation instruction and PC software and Android APP download link : folder/yhumeijk86fj8/DL2MP
2, IOS APP: search E_test on I-PHONE APP store to download
3, Android APP: file/0jiio3c0vuu1wx/U_Meter-Phone_mobile.apk/file
, Android APP: search E-test at Google play to down load
Attention:
The power supply specification we provide is DC12V US US standard power supply, and we will also be equipped with a US to EU EU adapter. If your country cannot use this power supply, it is recommended not to purchase it to avoid disputes!
At the same time, you can also find a local power supply DC12V 1A
150W 180W DC12V 1A
300W 50W 600W using DC12V 3A
Thank you for your support!
| SPECIFICATION | 150W/180W |
| WARRANTY | 180 DAYS |
File Download Way and DIY 150W~600W(200V & 3mA~25A/30A/35A/0A)
1, User manual, PC software installation instruction and PC software and Android APP download link : folder/yhumeijk86fj8/DL2MP
2, IOS APP: search E_test on I-PHONE APP store to download
3, Android APP: file/0jiio3c0vuu1wx/U_Meter-Phone_mobile.apk/file
, Android APP: search E-test at Google play to down load
Attention:
The power supply specification we provide is DC12V US US standard power supply, and we will also be equipped with a US to EU EU adapter. If your country cannot use this power supply, it is recommended not to purchase it to avoid disputes!
At the same time, you can also find a local power supply DC12V 1A
150W 180W DC12V 1A
300W 50W 600W using DC12V 3A
Thank you for your support!
--Product Parameter--
(DIY 150W / DIY 300W / DIY 50W / DIY 600W)
When product leave the factory, the default is: 150W (the jumper has been set to 150W)
When this product is at different powers, you need to set the jumper, please follow the following method to set!
@150W 3mA~25A (V*A<150W)
@300W 3mA~30A (V*A<300W)
@50W 3mA~35A (V*A<50W)
@600W 3mA~0A (V*A<600W)
Operation method: Long press the "ON/OFF" Button to enter the background, press the "M" Button, select 05 item: Precision of current: O10mA1mA, set by "+" or "-"
(Tips: Start the test with a minimum of 3mA)
Introduction to the key operation of frequently used functions
1)Short press the "ON/OFF" button to start and stop, short press the upper left corner of the "M" button to move the cursor and then adjust the corresponding value with the "+/- " button
2) Long press the "+/- " button at the same time to clear all accumulated data such as the current capacity, battery time, etc. (Long press the "ON/OFF" button to enter the background ,also can be cleared in the background menu)
3) Long press the "M" button and the function mode starts to flash, then short press the "+/-" button to select the function (CC/CV/CR/CP/BRT/PT)
) In OFF mode, long press the "ON/OFF" button to enter the background interface, then short press the "M" button to switch the setting column, and the "+/-" button to adjust the number
5) Short press the "+/-" button in the constant current accuracy column of the background setting interface to switch the constant current accuracy (10mA Or 1mA)
6) When the system is not supplying power, press and hold the "M" button and do not let go. Then power on again. Enter the splicing power option and jump to the actual power value before let go
7) Long press the "M" button the function mode starts to flash, short press the "M" button again to enter the setting adjustment value of the time-limited discharge and Cut off voltage column value
Panel Main buttons and description
:Bluetooth indicator(Flashing waiting for Bluetooth connection,Long light indicates successful connection)
:"+" Vave Increase Button(Short press the button to increase the number, long press the button to increase continuously,When the mode is flashing, short press the button to cycle backwards)
:"M" Set Buton(Long press "M" key to start function mode, press "+" or "-" key to switch CC/CV/CP/CR/BRT/PT mode, long press "M" key to start function mode, short press "M" again Key to switch between Time Discharge and Cut off voltage. Press the "+" or "-" key to set the value, the default is OFF)
:"-" Value Reduce Buton(Short press the button to decrease the number and long press the button to decrease continuously. When the mode is flashing, short press to cycle forward)
"ON/OFF" Run ON/OFF Button(Short press the button, it is ON or OFF
Long press the button to enter the product background settings, and use the "M" button and "+" or "-" button to set the parameters)
Host Parameters and description
1.Test various DC power inputs
2.MiNi USB detection port inputs
3.Micro USB detection port inputs
.Type-c USB detection port inputs
5.DIY assembly Different power reserve jumper positions(150W/300W/50W/600W)
6.External NTC temperature probe
7.Straight needle seat XH2.5-2P port
8.Straight needle seat XH2.5-2P port
9.8p cable connected to the panel
10.DC5.5 system power supply (must supply DC12V 1A)
11.Increase the power and expand the interface
12.Resistor*
Seven operating modes of operation
1.Constant current operation(CC)
2.Constant resistance operation(CR)
3.Constant power operation(CP)
.Constant voltage operation(CV)
5.Battery Internal Resistance Test Mode (BRT)
6.PT electrical parameters automatic test mode (PT)
7.CT Cable resistance test mode(CT)
Technological innovation, simple splicing, 600W high-power aging test
Real cost construction, radiator fans, 16 MOSFETs, increase the stability of the test!
Test all kinds of data cables/chargers
Test/discharge/aging/get it all
Play and test various USB data cables/chargers, first use a data cable
Connect the corresponding interface of the load, connect as shown in the figure below, when the load is turned on in the constant current mode
Adjust the current so that the voltage drop is 1V less than the no-load condition
The current value at this time is the current value of the measured data line
Play and measure the current, voltage, power and other parameters of various DC power adapters
Use the DC power supply to connect the DC independent power supply port of the load meter, and then use the "Settings" button to connect as shown in the figure below.
Precisely adjust the current to test the voltage and rated current of the power supply
The DC power supply can also be aged for a long time, with strong functions, simple operation, convenient and quick testing
Intelligent one-key full automatic detection of DC power supply
PT mode of charger current power performance
Press and hold the M button in the menu until the mode bar flashes, wait a while after pressing the ten-key PT mode
Automatically enter the DC power supply/charger auto-detector mode, then plug in your tested power supply and
Charger, then short press the start button, it will automatically start to run for a period of time and then report
Displays kinds of important numerical results, making complicated tests instantly simplified, accurate, and easy to use
Test all kinds of power bank capacity
Protection settings
1.Overload protection
2.Overcurrent protection
3. High temperature protection
Device background settings (Chinese / English settings)
1.Chinese settings
2.English settings
OTA firmware upgrade via Blue-tooth
1) Apple Mobile APP:
Please search for E_test in the application store to download and install, then click the Bluetooth APP icon to open the software, and then click the Bluetooth icon above the software to enter the selection DL2-BLE to connect, you can achieve mobile phone remote wireless remote control settings and Measurement function, the discharge status can be viewed at any time on the mobile phone, various data cleaning is visible, the voltage and current power curve of the discharge, etc.
2) Android phone APP:
Scan the QR code on the back of the host to download the corresponding APP software or Android APP: search E-test at Google play to down load . After the installation is complete, open the software and click the Bluetooth icon to enter the direct selection of DL2-BLE to successfully use it online. (No need for Bluetooth pairing, the software Bluetooth icon directly selects DL2. can)
3) Computer Bluetooth wireless online APP:
First add the Bluetooth device to the serial port device of DL2-SPP on the computer, then scan the QR code on the back of the host to download the corresponding APP software and store it. Open the software without installing and select the Bluetooth serial port model just added. You can successfully use online
About SOFTWARE QUESTIONS:
1. The APP crashes on my phone, what is the problem ?
A: For APP and PC software, because there may be incompatibilities problems, please download first before buying , if you can download and install, you can place order, or else do not buying. If you don't test the PC software and APP function before buying and find that the products works fine except the PC software or APP, we refuse to refund.For PC software, it only support win 7 and Win 10 above for now. For APP, it only support android 5.0 and above.
2. Why are there _BLE and _SPP modes and which one to choose?
A:Our APP adopts the latest connection technology, please do not pair in Bluetooth mode, directly click on the E-test (Android APP name) APP provided by us, click the Bluetooth symbol, E_test (Apple APP) select the _BLE Bluetooth name to proceed connect, that's it ok!
_BLE:is connected in mobile mode
_SPP:is connected in PC computer mode
3.What is the computer pairing password?
A:Password is "0000" or "123"
.Does it support WIFI mode?
A:No support, connected via wireless bluetooth mode!
5.Why does the mobile phone appear blank when opening your APP, and the signal list of _BLE cannot be displayed?
A:Please turn on the GPS positioning of your mobile phone, or in the mobile phone settings, find our APP, open the location information or storage information permission, again reconnect, that's it ok!
Product size and description
150W Product list
1.DL2MP -150W Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X 6pcs/sets
.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
300W product list
1.DL2MP-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X6pcs /sets X2
.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X1
450W product list
1.DL2MP-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X6pcs/sets X3
.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X2
600WP product list
1.DL2M-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X6pcs/sets X
.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X3
After the user use the sharing of information
Chinese users converted some of the cases
Write it at the end for professionals to read
1. In order to increase the playability of the product, it can be expanded to 1200W power discharge
2. You need to add 150W power expansion fans. If you purchase a 600W kit, you need to add four 150W expansion fans! (The 1200W schematic is 8 fans)
3. The splicing installation shall be carried out according to the splicing diagram!
. If the splicing fails, we can provide technical guidance and do not issue disputes until the problem is solved!
){kind=link}